Education & Events
We have a range of training modules, presentations and webinars available to help improve and build on your understanding of assistive technology. If any of these are of interest to you, please register or email your interest to marketing@alliedmedical.co.nz.
All Education & Events
An overview of all of Allied Medical's Orthotic & Physio Solutions along with looking at why someone may use bracing and when they need to be referred to a medical professional. The presentation is aimed at private businesses who are interested in supplying Orthotic & Physio products direct to the public.
Email marketing@alliedmedical.co.nz to register interest for this presentation and one of our team will be in touch to discuss possible dates and times.
An Introduction to the SWASH Go and SWASH Steady
- Orthotics and Physio
- Clinical Webinar
An Introduction to the SWASH Go and SWASH Steady
- Orthotics and Physio
- Clinical Webinar
This virtual education session reviews patient selection and fitting of the SWASH Steady and SWASH Go for the management of sitting instability and/or scissoring gait. The session covers the following;
- How to identify suitable candidates for SWASH
- How to select the most appropriate product for individual patients
- How to measure and fit the SWASH products
- How to troubleshoot possible problems you may encounter with SWASH
- The psychological impact of improved posture and hip stability
Allard Selection | Multi Open & Radialis
- Orthotics and Physio
- Presentation
Allard Selection | Multi Open & Radialis
- Orthotics and Physio
- Presentation
Allard Selection | Ulnar Deviation Orthosis
- Orthotics and Physio
- Presentation
Allard Selection | Ulnar Deviation Orthosis
- Orthotics and Physio
- Presentation
This Module is all about the new TB4 seating system from Pride. It will explain what chairs it can go on, how it all works and the differences between TB3 and TB4.
Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
Recording available on request. Please email marketing@alliedmedical.co.nz
This module contains a break down of the steps our Technicians take when setting up a clients powerchair. This covers all aspects of the set-up from the seat depth, armrest and foot plate heights, and controller placement.
Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
Recording available on request. Please email marketing@alliedmedical.co.nz
The Q-Logic 3 modules will be spread over multiple sessions and will cover programming for powerchairs with Q-Logic 3, customising powerchairs to help clients get the most out of their device, using the ECON Eco System and troubleshooting as well as providing an in-depth product overview. This is a follow on from Module 1 and you need to have attended or viewed the first module prior to attending this module. We will be building on what was covered in the first module, looking at more advanced programming options.
Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
Recording available on request. Please email marketing@alliedmedical.co.nz
The Q-Logic 3 modules will be spread over multiple sessions and will cover programming for powerchairs with Q-Logic 3, customising powerchairs to help clients get the most out of their device, using the ECON Eco System and troubleshooting as well as providing an in-depth product overview. This first session will focus on basic programming and how to utilise standard functions.
The session will include time for Q & A and we will send you a complete pdf of the module after the session.
Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
This session will offer a complete overview of Interactive Assist, the diagnostic app from Quantum Rehab that provides a direct, real-time connection from a powerchair’s electronics to a provider’s programming station. The session will cover what can be resolved remotely, how to use the app on both android and iPhones and connecting through ECON-W.
The session will include time for Q & A and we will send you a complete pdf of the module after the session.
Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
This module follows on from the earlier Introduction to Alternative Drive Controls module. This module includes how to set up switch driving to allow clients another way to drive when other options are no longer suitable.
Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
Recording available on request. Please email marketing@alliedmedical.co.nz
An Introduction to Alternative Drive Controls
- webinar
- AML Certified
- Technical Webinar
An Introduction to Alternative Drive Controls
- webinar
- AML Certified
- Technical Webinar
This module focuses on setting up the i-drive Head Array and takes you through the various steps involved in setting this up on a powerchair equipped with Q-Logic 3. You will learn how to install i-drive, to connect i-Drive to Q-Logic 3, how to adjust the settings in Q-Logic 3 using Econ-W and how to make fine adjustments to the head array to suit the client’s needs.
Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
Recording available on request. Please email marketing@alliedmedical.co.nz
This module covers how you can get the most of the Quantum Rehab TRU-Balance 3 seating systems by understanding how to adjust seat width, seat depth and correctly configure the centre of gravity. We will also cover the basic features and components of the REAC Lift and Tilt seat base system.
Please Note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
Recording available on request. Please email marketing@alliedmedical.co.nz
Upcoming Education & Events
This session will offer a complete overview of Interactive Assist, the diagnostic app from Quantum Rehab that provides a direct, real-time connection from a powerchair’s electronics to a provider’s programming station. The session will cover what can be resolved remotely, how to use the app on both android and iPhones and connecting through ECON-W.
The session will include time for Q & A and we will send you a complete pdf of the module after the session.
Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.
The Q-Logic 3 modules will be spread over multiple sessions and will cover programming for powerchairs with Q-Logic 3, customising powerchairs to help clients get the most out of their device, using the ECON Eco System and troubleshooting as well as providing an in-depth product overview. This first session will focus on basic programming and how to utilise standard functions.
The session will include time for Q & A and we will send you a complete pdf of the module after the session.
Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.