The VIP2 comes with an adjustable headrest with a greater range of position options while other enhancements include a deeper seat for taller users and a tension adjustable backrest. Product highlights are as follows;

Key Features

• Tilt-in-Space: The Tilt-in-Space system allows the wheelchair user to change position throughout the day, which will redistribute and relieve pressure.
• Lightweight: Weighing under 26kg in all sizes.
  
• Foldable and Durable: The foldable design of the VIP2 ensures it can be easily transported in the boot of most standard family-sized cars.
• Weight Shifting with Comfort: The design of a unique weight-shifting system aims to reduce the feeling of anxiousness some users have when going into the tilt position.  The system allows the centre of gravity to travel between the front and rear wheels while tilting which provides steadier balance and a greater feeling of security.
• Anti-Sliding Reclining System: The reclining pivot point of the chair is located close to the user's hip joint, which synchronises the motion of the body and the chair, allowing for minimal sliding.
• Modularised Design, Easy to Change: It is ideal for those suffering from progressive diseases, as it can easily be changed from a tilt-in-space only chair to a tilt and recline chair.
• Curved Headrest: The curved headrest provides a wide range of adjustment and positioning. The head pad angle can be adjusted based on the user’s head.
• Tension Adjustable Backrest: Unlike conventional wheelchairs, the backrest uses adjustable velcro straps to change the tension and conform according to the wheelchair user. This helps prevent slouching and the hammock effect.
• Adjustable and Detachable Armrests: Adjust the height of the armrest by moving it up or down until you find the ideal height. A proper armrest height helps to relieve loads on the neck, shoulders, and arms and alleviate stress on the back. No tools required. The armrest is fully detachable and offers greater convenience transferring on and off the wheelchair.
• J Hook Handles: Two J Hook Handles have been added to the back canes to provide extra height, allowing caregivers to move the VIP2 with ease and care. These are now a standard feature on all VIP2 wheelchairs.
  
• AEGIS Microbe Shield: The upholstery is treated with Aegis Microbe Shield, which is approved by the FDA, EPA, EU, etc.. The anti-microbial upholstery inhibits bacterial and fungal growth, eliminates odor and is designed for easy cleaning. It is a shield for your health.
• Two Legrest Options: The Karma VIP2 comes standard with Swing Away Legrests, however, Elevating Legrests are also available for purchase.
• Anti-tipper: Prevents the wheelchair from tipping back.

Seat Size	16" x 16"	16" x 18"	18" x 16"	18" x 18"
Front Castor	7"	7"	7"	7"
Rear Wheel	20"	20"	20"	20"
Backrest Height	510 mm	510 mm	510 mm	510 mm
Headrest Above Seat	630 - 860 mm	630 - 860 mm	630 - 860 mm	630 - 860 mm
Armrest to Seat	220 - 280 mm	220 - 280 mm	220 - 280 mm	220 - 280 mm
Location of Armrest Structure	385 mm	410 mm	385 mm	410 mm
Seat Surface Height at Front Edge	470	490 mm	490 mm	490 mm
Footrest to Seat Distance	320 mm	420 mm	420 mm	420 mm
Effective Seat Width	460 mm	460 mm	510 mm	510 mm
Effective Seat Depth	430 mm	470 mm	430 mm	470 mm
Seat Plane Angle	1 - 36°	1 - 36°	1 - 36°	1 - 36°
Backrest Angle	13 - 43°	13 - 43°	13 - 43°	13 - 43°
Seat to Backrest Angle	102 - 132°	102 - 132°	102 - 132°	102 - 132°
Leg to Seat Angle	100°	100°	100°	100°
Overall Product Length (inc legrest)	1070 mm	1120 mm	1070 mm	1120 mm
Overall Product Width	660 mm	660 mm	710 mm	710 mm
Overall Product Height	1380 mm	1380 mm	1380 mm	1380 mm
Folded Length	840 mm	890 mm	840 mm	890 mm
Folded Width	380 mm	380 mm	380 mm	380 mm
Folded Height	715 mm	715 mm	715 mm	715 mm
Total Product Weight	25.4 kg	25.6 kg	25.6 kg	25.8 kg
User Weight Limit	115 kg	115 kg	115 kg	115 kg
Minimum Turning Radius	905 mm	975 mm	905 mm	975 mm
Minimum Turning Radius Without User	830 mm	890 mm	830 mm	890 mm
Pivot Width	1210 mm	1280 mm	1210 mm	1280 mm
Static Stability Downhill	10°	10°	10°	10°
Static Stability Uphill (with anti-tippers)	16°	16°	16°	16°
Static Stability Sideways	10°	10°	10°	10°
Handrim Diameter	430 mm	430 mm	430 mm	430 mm
Horizontal Location of Axle	90 mm	90 mm	90 mm	90 mm
Standard Tyres (Standard Extra Option: Pneumatic)	20" Solid	20" Solid	20" Solid	20" Solid

Is it possible to put a rigid backrest on the Karma VIP2 Tilt and Recline Wheelchair?

Yes, this is possible. The back upholstery will need to be removed and then you can add a backrest. The backrest would then need to be removed to fold the wheelchair.

Where can I find the PSI on a Karma Tyre?

The is located on the side wall of the tyre.

Karma VIP2 Brochure.pdf Karma VIP2 Series Owners Manual.pdf Wheelchair Measuring Form Manual Tilt and Recline Wheelchairs Solution Chart.pdf